Anderson Phase Converters

..... OFFICE AND TECH HOURS MONDAY THRU FRIDAY 7:00AM TO 5:00PM CST AND SATURDAYS 8:00AM TO 12:00PM CST

    All New !!!       

We sell Rotary and Static Phase Converters. They run all types of equipment that need 3 phase power.

The Phase Converters run off of 240 volt single phase power, that is in your home or business.

The size of converter you need depends on the size of the motors on your equipment. Some require special sizing to get the right converter.

With a 5 HP Rotary converter You may also run more than one motor off the same converter, as long as it is not larger than the 5 hp and run a combined total hp of all motors up to 15 hp. With Rotary converters you get full power and instant reversing.

Here are some sizing examples:

A 5 hp Table Saw would need a 5 hp converter.

A 7-1/2 HP Gear Head Lathe would need at least a  10 HP Rotary Converter.

A 10 HP Air compressor would need a 20 HP rotary converter,  Air compressors have harder initial starting loads.

A 15 HP CNC Machine would need a 30 HP CNC Converter. The larger converter is needed to run the machine properly to maintain voltage.

The harder the starting load of an Air Compressor and the type of machine as with Computer Controlled machines require a Converter that is 2 times larger than their motors.

This is a partial list of equipment that Converters are used on:

Machine Shop Equipment: Lathes
                                          Milling Machines
                                          Grinders
                                          EDM Machines
                                          Band Saws
                                          CNC Machines

Wood Shop Equipment:    Table Saws
                                          Planers
                                          Joiners
                                          Lathes
                                          Shapers
                                          Drill Presses
Printing Equipment
Restaurant Equipment
Mining Equipment
Pumps Hydraulic and Water
Air Compressors

All of our Rotary Converters  have a switch to turn them off and on. (see picture. )Nothing extra to buy. Totally enclosed fan cooled heavy duty idler motors.

Our Converters have easy wiring 1 box for 240v single phase in and 1 box for 240v 3 phase out

We also have remote control starting of the converter with our hand held remote unit for an extra cost.

Static Phase Converters

Static Converters run Three-Phase motors on single phase power at 2/3 rated horse power. Standard static converters are for equipment that does not have much of a load at start up and few starts an hour. Heavy duty static converters are for machines that start more often and that have a bigger load on the motor, not a free wheeling situation. Choose the size for the motor on your machine. These static converters are usually just for one motor or just one machine. Static Converters are not for Welders, CNC Machines, Air Compressors, Refrigeration equipment, Hydraulic or Water Pumps, 2 Speed motors or any machine that needs all three phases to power for the machine to work properly. For indoor use only.